/**
 @page Tips_Checksum_CRC16

 @verbatim
 * @file    Tips/Checksum_CRC16/readme.txt
 * @version V1.01
 * @date    2024-03-26
 * @brief   Description of Tips Checksum_CRC16 example.
 @endverbatim

@par Example Description:

The example provided involves executing an SREC tool during the firmware burning process
to calculate a CRC16 checksum and create a new hex file.

In the newly generated hex file, the CRC value and AP Length are stored at positions 0x28 and 0x34, respectively.

When running the example, it reads from these positions (0x28 and 0x34) and outputs the data through Retarget.

This information should be included in the README file.

@par Directory Contents:

- Tips/Checksum_CRC16/main.c                           Main program
- Tips/Checksum_CRC16/ht32fxxxxx_nn_it.c               Interrupt handlers

@par Hardware and Software Environment:

- This example can be run on the HT32 series development kit.
- Refer "ht32_board_config.h" for pin assignment.
- You need a terminal software such as TeraTerm (https://ttssh2.osdn.jp/).
- Connect a null-modem female/female RS232 cable between the UxART and PC serial port.
  Terminal configuration:
  - Word Length = 8 Bits
  - One Stop Bit
  - No parity
  - BaudRate = 115200 baud
  - Flow control: None

@par Firmware Disclaimer Information

1. The customer hereby acknowledges and agrees that the program technical documentation, including the
   code, which is supplied by Holtek Semiconductor Inc., (hereinafter referred to as "HOLTEK") is the
   proprietary and confidential intellectual property of HOLTEK, and is protected by copyright law and
   other intellectual property laws.

2. The customer hereby acknowledges and agrees that the program technical documentation, including the
   code, is confidential information belonging to HOLTEK, and must not be disclosed to any third parties
   other than HOLTEK and the customer.

3. The program technical documentation, including the code, is provided "as is" and for customer reference
   only. After delivery by HOLTEK, the customer shall use the program technical documentation, including
   the code, at their own risk. HOLTEK disclaims any expressed, implied or statutory warranties, including
   the warranties of merchantability, satisfactory quality and fitness for a particular purpose.

 * <h2><center>Copyright (C) Holtek Semiconductor Inc. All rights reserved</center></h2>
 */
