/**
@page USART_HyperTerminal_TxRx

 @verbatim
 * @file    USART/HyperTerminal_TxRx/readme.txt
 * @version V1.00
 * @date    2014-06-30
 * @brief   Description of USART0 Hyper Terminal Tx Rx example.
 @endverbatim

@par Example Description:

This example describes how to use the USART0 to print and get character from hyperterminal.

The USART_CLK frequency is set to 72 MHz.
 
The USART baud rate is set to 115200 bps.

USART will print "Hello World!" string 10 times on hyperterminal.

Then USART0 will get character from hyperterminal and show again on the screen.(Loop) 

@par Directory Contents:

- USART/HyperTerminal_TxRx/main.c               Main program
- USART/HyperTerminal_TxRx/ht32fxxxx_it.c       Interrupt handlers

@par Hardware and Software Environment:

- Connect a null-modem female/female RS232 cable between the COM1 DB9 connector
  and PC serial port.Hyperterminal configuration:
  - Word Length = 8 Bits
  - One Stop Bit
  - No parity
  - BaudRate = 115200 baud
  - flow control: None
- This example can be run on HT32 Series development board.

@par Firmware Disclaimer Information

1. The customer hereby acknowledges and agrees that the program technical documentation, including the
   code, which is supplied by Holtek Semiconductor Inc., (hereinafter referred to as "HOLTEK") is the
   proprietary and confidential intellectual property of HOLTEK, and is protected by copyright law and
   other intellectual property laws.

2. The customer hereby acknowledges and agrees that the program technical documentation, including the
   code, is confidential information belonging to HOLTEK, and must not be disclosed to any third parties
   other than HOLTEK and the customer.

3. The program technical documentation, including the code, is provided "as is" and for customer reference
   only. After delivery by HOLTEK, the customer shall use the program technical documentation, including
   the code, at their own risk. HOLTEK disclaims any expressed, implied or statutory warranties, including
   the warranties of merchantability, satisfactory quality and fitness for a particular purpose.

 * <h2><center>Copyright (C) Holtek Semiconductor Inc. All rights reserved</center></h2>
 */
